 |
MED64 System
MED Probe
MED64 Amplifier
MED Connector
Software
High-throughput
Perfusion Accessories
Key Technologies
|
MED CONNECTOR
MED Connector
(MED-C03)

- Used for communication between the MED probe and amplifier.
- Provides a mechanically-stable platform for the MED probe.
- Multi-layer electrical shielding rejects hum noise and provides excellent signal-to-noise ratios.
- NO active on-board electrical circuitry; connectors can safely be placed in high-humidity environment (e.g. cell culture incubator).
- Provides clear optical path through probe for microscopy.
Specifications
| MED probe securing mechanism |
Screw down |
| Material |
Aluminum |
| Contact resistance |
<30 mΩ |
| Printed wiring |
4 layers (reject hum noise by a multi-shield structure) |
| Dimensions |
W174 x H21 x D150 mm |
MED Heated Connector
(MED-CP02H)

- Heater and thermocouple sensor are incorporated into the MED
connector.
- Bath temperature in the MED probe is maintained using a
ThermoClamp-1TM *controller manufactured by AutoMate Scientific, Inc.
- Easy-to-use. No additional equipment necessary. Simply set the
desired temperature on the control panel of the ThermoClamp-1TM.
Measured temperature is displayed on the large LCD display.
- Can be used with or without perfusion. Included tubing through
connector provides in-line solution heating.
- Low-noise. ThermoClamp-1TM circuitry is optimized for
electrophysiology, preserving the MED64 system’s industry-leading low
noise at your desired temperature.
Specifications
|
MED Heated Connector
(MED-CP02H) |
| MED probe securing mechanism |
Screw down |
| Material |
Aluminum,
Gold plate for contact pins |
| Contact resistance |
<30 mΩ |
|
Heating device |
Transistor |
Temperature accuracy
(for solution in MED probe) |
< 1 °C
Usually <0.1 °C (see below) |
|
Range of verified <0.1°C
accuracy |
With perfusion:
< 32°C
(RT = 25°C)
Without perfusion: <37°C (RT = 25 °C) |
|
Dimensions |
W174 x H38 x D150 mm |
|
Weight |
700 g |
|
|
|
|
Temperature controller (ThermoClamp-1TM,
manufactured by AutoMate Scientific) |
|
Temperature controller |
Auto-tuning PID (Proportional Integral
Derivative ) temperature control |
|
Resolution |
0.1
°C |
|
Set range |
Ambient - 50°C |
|
Power supply |
AC 100-240V, 50/60Hz |
|
Maximum power consumption |
80W |
|
Dimensions |
W295 x H58 x D201 mm |
|
Weight |
1.0 Kg |
*ThermoClamp-1 is a trademark of AutoMate
Scientific Inc.
|